Plascon TradePro Solvent-Based Primer is a premium alkali-resistant primer designed for interior and exterior masonry surfaces. Manufactured by Kansai Plascon, it provides excellent adhesion to new plaster and acts as a protective barrier against saponification. Supplied in a 20L size, it is perfect for contractors and large-scale projects. Delivery is restricted to select zones, with customers outside these areas required to contact Habitat Potch for options.

Plascon Tradepro Solvent-Based Primer Benefits and Features

• Good Adhesion: Bonds strongly to new plaster surfaces
• Alkali Resistant: Protects subsequent coats against saponification
• Versatile Compatibility: Can be overcoated with water-based or solvent-based topcoats
• Binding & Sealing: Ideal for soft plaster, porous boards, brickwork, and gypsum surfaces
• Large-Scale Packaging: 20L size suited for contractors and extensive projects

Steps to Follow For Using the Plascon Tradepro Solvent-Based Primer

Preparation

• Ensure surfaces are clean, dry, and free from dust, oil, and grease.
• For new work, clean with Polycell Sugar Soap Powder and rinse thoroughly.
• For previously painted surfaces, remove loose paint and fill defects with Polycell Polyfilla.

How to Apply the Plascon Tradepro Solvent-Based Primer

• Stir thoroughly with a flat paddle until homogeneous.
• Apply one coat using brush, roller, or airless spray.
• Do not thin the product.

Cleanup

• Clean tools with mineral turpentine or Polycell Brush Cleaner.
• Store leftover product in a cool, dry place away from heat and sparks.

A Few Scenarios Where the Product Can Be Used

• Priming cement plaster walls before painting
• Sealing porous paper-faced boards
• Binding soft and brittle plaster surfaces
• Preparing brickwork and gypsum plaster for topcoats

Other Products You Might Like for Your Painting Projects:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Always ensure good ventilation during application and drying. Avoid painting in temperatures below 10 ℃ or during inclement weather. Keep out of reach of children and avoid contact with skin and eyes. Harmful if swallowed — seek medical attention immediately. This product is flammable; store away from heat and sparks. Please share your experience by leaving a review.

View TDS!

The post Plascon Tradepro Solvent-Based Primer | Matt, 20L first appeared on Habitat Potch.

Plascon TradePro Water-Based Plaster Primer is a premium solution for priming new cement plaster, concrete, porous brickwork, and building boards. Manufactured by Kansai Plascon, this primer combines low VOC, quick drying, and excellent adhesion to deliver superior preparation results. Available in 5L packaging, it can be delivered nationwide with a flat courier fee or collected directly from Habitat Potch.

Plascon TradePro Water-Based Plaster Primer Benefits and Features

• Low VOC: Safer for indoor environments
• Quick Drying: Saves time on projects
• Seals Porosity: Creates a uniform surface for topcoats
• Excellent Adhesion: Ensures durability of subsequent layers
• Breathable: Allows moisture to escape, preventing blistering
• Low Odour: Comfortable application experience
• Good Spreadability: Efficient coverage with fewer coats

Steps to Follow For Using the Plascon TradePro Water-Based Plaster Primer

Preparation

• Ensure surfaces are dry, firm, and free from dust, grease, and oil.
• Clean with Plascon Aquasolv Degreaser and rinse thoroughly.
• Fill defects with Polycell Polyfilla and allow to dry.

How to Apply the Plascon TradePro Water-Based Plaster Primer

• Stir thoroughly with a flat paddle until homogeneous.
• Apply by brush, roller, or airless spray.
• Do not thin the product.

Cleanup

• Wash tools immediately with clean water.
• Do not pour waste water or paint down the drain.

A Few Scenarios Where the Product Can Be Used

• Priming new cement plaster walls
• Preparing concrete surfaces for painting
• Sealing porous brickwork before decorative coats
• Treating fibre-cement boards for improved paint adhesion

Other Products You Might Like for Your Roofing Project:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Always ensure good ventilation during application and drying. Avoid painting in temperatures below 10 ℃ or during inclement weather. Prevent contact with skin and eyes, and wash immediately if accidental exposure occurs. Harmful if swallowed — seek medical attention without inducing vomiting. Keep out of reach of children and dispose of waste responsibly. Please share your experience by leaving a review.

View TDS!

The post Plascon TradePro Water-Based Plaster Primer | Matt, 5L first appeared on Habitat Potch.

Plascon TradePro Solvent-Based Primer (USP 1) is a professional-grade alkali-resistant primer formulated to safeguard interior and exterior masonry surfaces. Manufactured by Kansai Plascon, this solution acrylic primer ensures excellent adhesion to new plaster and acts as a protective barrier against saponification. Available in a matt off-white finish, it can be overcoated with both water-based and solvent-based topcoats. Customers can enjoy nationwide delivery with a flat courier fee or book their own courier at checkout.

Plascon TradePro Solvent-Based Primer Benefits and Features

• Alkali resistant: Protects alkyd paints from saponification
• Good adhesion: Bonds strongly to new plaster and porous substrates
• Versatile coating: Compatible with water-based and solvent-based topcoats
• Binding and sealing: Ideal for brittle cement plaster, fibre-cement, brickwork, and gypsum plaster
• Professional finish: Ensures durability and long-lasting protection

Steps to Follow For Using the Plascon TradePro Solvent-Based Primer

Preparation

• Ensure surfaces are clean, dry, and free from dust, oil, or grease.
• For new work, wash with Polycell Sugar Soap Powder, rinse, and allow to dry.
• For previously painted surfaces, remove loose paint, clean with Polycell Sugar Soap Powder, and repair defects with Polycell Polyfilla.

How to Apply the Plascon TradePro Solvent-Based Primer

• Stir thoroughly before and during use.
• Apply one continuous coat using brush, roller, or airless spray.
• Allow 16 hours drying time before overcoating.

Cleanup

• Clean tools with Mineral Turpentine or Polycell Brush Cleaner.
• Dispose of waste responsibly.

A Few Scenarios Where the Product Can Be Used

• Interior cement plaster walls
• Exterior concrete surfaces
• Fibre-cement boards
• Brickwork and soft board
• Gypsum plaster

Other Products You Might Like for Your Painting Projects:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Always keep paint out of reach of children and ensure good ventilation during application and drying. Avoid contact with skin and eyes; wash immediately with soap and water if accidental contact occurs. Harmful if swallowed—seek medical attention without inducing vomiting. This product is flammable and must be stored in a cool, dry place away from heat and sparks. Please share your experience by leaving a review.

View TDS!

The post Plascon Tradepro Solvent-Based Primer | Matt, 5L first appeared on Habitat Potch.

Plascon TradePro Solvent-Based Primer is a professional alkali-resistant primer that ensures strong adhesion and reliable protection for topcoats. Suitable for interior and exterior masonry surfaces, it is ideal for cement plaster, concrete, fibre-cement, and porous substrates. With a matt finish and binding properties, it prepares surfaces for water-based or solvent-based topcoats. Customers in Johannesburg, Pretoria, and surrounding areas benefit from personal dispatch, while other regions can arrange delivery directly with Habitat Potch.

Plascon TradePro Solvent-Based Primer Benefits and Features

• Alkali Resistant: Protects alkyd paints against saponification
• Excellent Adhesion: Bonds well to new plaster and porous substrates
• Versatile Application: Suitable for cement plaster, concrete, fibre-cement, brickwork, gypsum plaster, and more
• Dual Compatibility: Can be overcoated with water-based or solvent-based topcoats
• Binding & Sealing: Strengthens soft and brittle surfaces for durable finishes
• Professional Quality: Reliable preparation for medium-scale projects

Steps to Follow For Using Plascon TradePro Solvent-Based Primer

Preparation

• Ensure surfaces are clean, dry, firm, and free of dust, oil, or grease
• For new work: Wash with POLYCELL SUGAR SOAP POWDER, rinse, and dry
• For previously painted surfaces: Remove loose paint, clean thoroughly, and repair defects with POLYCELL POLYFILLA

How to Apply Plascon TradePro Solvent-Based Primer

• Stir thoroughly with a flat paddle until homogeneous
• Apply one coat by brush, roller, or airless spray
• Allow 16h drying time before overcoating
• Must be overcoated within 7 days to avoid adhesion problems

Cleanup

• Clean tools with mineral turpentine or POLYCELL brush cleaner
• Store product away from direct sun, heat, sparks, or severe cold

A Few Scenarios Where the Product Can Be Used

• Medium-scale masonry projects
• Interior and exterior plaster preparation
• Fibre-cement and porous board sealing
• Brickwork and gypsum plaster priming

Other Products You Might Like for Your Painting Projects:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Flammable – store in a cool, dry place away from heat and sparks. Ensure good ventilation during application. Avoid contact with eyes and skin. Harmful if swallowed. Keep out of reach of children. Please share your experience by leaving a review.

View DTS!

The post Plascon TradePro Solvent-Based Primer | White, 5L first appeared on Habitat Potch.

Plascon TradePro Solvent-Based Primer is a professional alkali-resistant primer that ensures strong adhesion and reliable protection for topcoats. Suitable for interior and exterior masonry surfaces, it is ideal for cement plaster, concrete, fibre-cement, and porous substrates. With a matt finish and binding properties, it prepares surfaces for water-based or solvent-based topcoats. Customers in Johannesburg, Pretoria, and surrounding areas benefit from personal dispatch, while other regions can arrange delivery directly with Habitat Potch.

Plascon TradePro Solvent-Based Primer Benefits and Features

• Alkali Resistant: Protects alkyd paints against saponification
• Excellent Adhesion: Bonds well to new plaster and porous substrates
• Versatile Application: Suitable for cement plaster, concrete, fibre-cement, brickwork, gypsum plaster, and more
• Dual Compatibility: Can be overcoated with water-based or solvent-based topcoats
• Binding & Sealing: Strengthens soft and brittle surfaces for durable finishes
• Professional Quality: Reliable preparation for large-scale projects

Steps to Follow For Using Plascon TradePro Solvent-Based Primer

Preparation

• Ensure surfaces are clean, dry, firm, and free of dust, oil, or grease
• For new work: Wash with POLYCELL SUGAR SOAP POWDER, rinse, and dry
• For previously painted surfaces: Remove loose paint, clean thoroughly, and repair defects with POLYCELL POLYFILLA

How to Apply Plascon TradePro Solvent-Based Primer

• Stir thoroughly with a flat paddle until homogeneous
• Apply one coat by brush, roller, or airless spray
• Allow 16h drying time before overcoating
• Must be overcoated within 7 days to avoid adhesion problems

Cleanup

• Clean tools with mineral turpentine or POLYCELL brush cleaner
• Store product away from direct sun, heat, sparks, or severe cold

A Few Scenarios Where the Product Can Be Used

• Large-scale masonry projects
• Interior and exterior plaster preparation
• Fibre-cement and porous board sealing
• Brickwork and gypsum plaster priming

Other Products You Might Like for Your Painting Projects:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Flammable – store in a cool, dry place away from heat and sparks. Ensure good ventilation during application. Avoid contact with eyes and skin. Harmful if swallowed. Keep out of reach of children. Please share your experience by leaving a review.

View DTS!

The post Plascon TradePro Solvent-Based Primer | White, 20L first appeared on Habitat Potch.

Plascon Master Prep Water-Based Grey Economy Primer is engineered for masonry surfaces, offering dependable adhesion and surface sealing. Manufactured by Kansai Plascon, this primer ensures vivid colour finishes by evening out porosity and providing a breathable, low-odour base coat. With its quick drying time and eco-friendly low VOC formulation, it is ideal for homeowners and contractors working on small to medium projects. Delivery is available nationwide with flat-rate courier options and free zones for qualifying orders.

Plascon Master Prep Plaster Primer Benefits and Features

• Low VOC: Safe and eco-friendly application
• Quick drying: Touch dry in 30 minutes, recoat in 1 hour
• Seals porosity: Ensures vivid colour topcoats
• Excellent adhesion: Strong bond to cement plaster and concrete
• Breathable: Allows moisture to escape naturally
• Low odour: Comfortable for indoor use
• Good obliteration: Reliable coverage with fewer coats
• Compact 5L packaging: Perfect for smaller projects

Steps to Follow For Applying Plascon Master Prep Plaster Primer

Preparation

• Ensure surfaces are dry, firm, and free from dust, grease, and oil
• Remove contaminants with Plascon Aquasolv Degreaser (GR 1) and rinse thoroughly
• Fill defects with Polycell Polyfilla before priming
• Not suitable for gypsum or moisture-prone areas

How to Apply the Plascon Master Prep Plaster Primer

• Stir thoroughly before use
• Apply by brush, roller, or airless spray without thinning
• Maintain a wet edge to avoid lap marks
• Observe overcoating times for best adhesion

Cleanup

• Wash tools with clean water immediately after use
• Store product away from direct sunlight and severe cold
• Dispose of empty containers responsibly

A Few Scenarios Where the Product Can Be Used

• Priming new cement plaster walls
• Preparing concrete surfaces for vivid colour finishes
• Sealing porous brickwork in exterior projects
• Fibre-cement boards in residential or commercial builds

Other Products You Might Like for Your Painting Project:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Ensure good ventilation during application and drying. Avoid painting in temperatures below 10 °C or during inclement weather. In case of skin contact, wash with soap and water. Avoid eye contact; rinse immediately with clean water if exposed. Harmful if swallowed – seek medical attention immediately. Keep out of reach of children and refer to the Safety Data Sheet for complete guidelines. Please share your experience by leaving a review.

View DTS!

The post Plascon Master Prep Plaster Primer | Light Grey, 5L first appeared on Habitat Potch.

Plascon Master Prep Water-Based Grey Economy Primer is engineered for masonry surfaces, offering dependable adhesion and surface sealing. Manufactured by Kansai Plascon, this primer ensures vivid colour finishes by evening out porosity and providing a breathable, low-odour base coat. With its quick drying time and eco-friendly low VOC formulation, it is ideal for contractors and homeowners tackling large-scale projects. Delivery is restricted to select regions, with customers outside these zones advised to contact the store for options.

Plascon Master Prep Plaster Primer Benefits and Features

• Low VOC: Safe and eco-friendly application
• Quick drying: Touch dry in 30 minutes, recoat in 1 hour
• Seals porosity: Ensures vivid colour topcoats
• Excellent adhesion: Strong bond to cement plaster and concrete
• Breathable: Allows moisture to escape naturally
• Low odour: Comfortable for indoor use
• Good obliteration: Reliable coverage with fewer coats
• Large-scale suitability: 20L packaging for extended projects

Steps to Follow For Applying Plascon Master Prep Plaster Primer

Preparation

• Ensure surfaces are dry, firm, and free from dust, grease, and oil
• Remove contaminants with Plascon Aquasolv Degreaser (GR 1) and rinse thoroughly
• Fill defects with Polycell Polyfilla before priming
• Not suitable for gypsum or moisture-prone areas

How to Apply the Plascon Master Prep Plaster Primer

• Stir thoroughly before use
• Apply by brush, roller, or airless spray without thinning
• Maintain a wet edge to avoid lap marks
• Observe overcoating times for best adhesion

Cleanup

• Wash tools with clean water immediately after use
• Store product away from direct sunlight and severe cold
• Dispose of empty containers responsibly

A Few Scenarios Where the Product Can Be Used

• Priming new cement plaster walls
• Preparing concrete surfaces for vivid colour finishes
• Sealing porous brickwork in exterior projects
• Fibre-cement boards in residential or commercial builds

Other Products You Might Like for Your Painting Project:

• Brushes
• Tray Sets
• Other Plascon Products

Health and Safety

Ensure good ventilation during application and drying. Avoid painting in temperatures below 10 °C or during inclement weather. In case of skin contact, wash with soap and water. Avoid eye contact; rinse immediately with clean water if exposed. Harmful if swallowed – seek medical attention immediately. Keep out of reach of children and refer to the Safety Data Sheet for complete guidelines. Please share your experience by leaving a review.

View DTS!

The post Plascon Master Prep Plaster Primer | Light Grey, 20L first appeared on Habitat Potch.

Duram Plaster Primer is a water‑based adhesion primer formulated to penetrate and seal porous or powdery surfaces. It resists alkali, peeling, and efflorescence, ensuring optimum adhesion for topcoats. With quick drying and low odour, it provides a smooth, uniform base for decorative paints, making it essential for both interior and exterior projects.

Duram Plaster Primer | Water-based, 20L Benefits and Features

• Water‑based & Non‑toxic: Safe and eco‑friendly.
• Multi‑Surface Use: Effective on plaster, cement, concrete, gypsum, fibre‑cement, and brickwork.
• Alkali Resistance: Prevents peeling and efflorescence.
• Deep Penetration: Seals porous surfaces and binds powdery plaster.
• Excellent Obliteration: Ensures uniform topcoat finish.
• Quick Drying: Reduces waiting time before painting.
• Breathable Barrier: Allows moisture release while protecting substrate.
• Easy Application: Brush, roller, or spray with minimal splatter.

Steps to Follow for Applying Duram Plaster Primer | Water-based, 20L

Preparation

• Ensure surfaces are clean, dry, and free from dirt, grease, and loose paint.
• New plaster must be aged at least 28 days or have moisture content below 10%.
• Remove flaking paint with a wire brush, sandpaper, or high‑pressure cleaner.

How to Apply Duram Plaster Primer | Water-based, 20L

• Stir thoroughly before use.
• Apply 1 coat evenly with brush, roller, or spray.
• Highly porous surfaces may require a second coat.
• Allow 4–6 hours drying time before overcoating.
• Overcoat within 2–3 days with premium Duram decorative paints.

Cleanup

• Clean equipment with water.
• Wash skin with soap and water.

A Few Scenarios Where the Product Can Be Used

• Sealing new plaster walls before painting.
• Binding powdery gypsum or rhinolite surfaces.
• Priming fibre‑cement boards for decorative finishes.
• Preparing brickwork or concrete for paint adhesion.
• Interior and exterior cement surfaces requiring alkali resistance.

Other Products You Might Like for Your Painting Project

• Plascon
• Duram
• Dulux

Health and Safety

Duram Plaster Primer is water‑based and generally safe to use. Always wear protective gloves and clothing, and ensure good ventilation. Avoid contact with eyes and skin. If swallowed, seek medical advice immediately. Dispose of contents responsibly and recycle empty containers.

Want to know more about this product? Click here to view the DTS!

The post Duram Plaster Primer | Water-based, 20L first appeared on Habitat Potch.

Duram Adhesion Plaster Primer is a solvent-based plaster primer designed to penetrate porous masonry, resist alkali, and control efflorescence for a stable, long-lasting foundation. Because it bonds strongly to cement plaster, fibre-cement, concrete, brickwork, gypsum plaster, and composite boards, it enables reliable adhesion for both oil- and water-based topcoats. With quick drying and breathable sealing, projects progress smoothly while finishes remain uniform and durable.

Duram Adhesion Plaster Primer Benefits and Features

• Alkali resistance: Shields coatings on fresh cement and high-pH surfaces.
• Efflorescence control: Minimizes peeling caused by salt migration.
• Penetrating sealer: Stabilizes powdery, friable substrates for dependable adhesion.
• Multi-surface compatibility: Ideal for cement plaster, gypsum plaster, fibre-cement, concrete, brickwork, composite boards.
• Coverage efficiency: 6–8 m² per litre per coat; second coat for highly porous surfaces.
• Breathable seal: Allows moisture release while protecting the base.
• Surface masking: Promotes a uniform topcoat by hiding minor imperfections.
• Quick drying: Touch-dry ±2 hours; recoat ±8 hours for faster project turnaround.
• Topcoat versatility: Compatible with oil- and water-based decorative paints.
• Easy application: Brush or roller with smooth, even strokes.

Steps to follow for applying the Duram Adhesion Plaster Primer

Preparation

1. Clean the surface thoroughly—remove dust, dirt, grease, salts, algae, fungi, and loose or flaking paint.
2. For powdery or flaking areas, wire-brush, sand, or high-pressure clean; rinse and allow to dry.
3. Confirm moisture content is below 3% or ensure cement-based surfaces have cured for at least 28 days.
4. Check batch numbers on containers to maintain consistency across the project.
5. Mask adjacent areas and lay drop sheets to protect floors and fixtures.

How to apply the Duram Adhesion Plaster Primer

1. Stir thoroughly with a flat paddle; do not thin.
2. Apply evenly with a brush or roller using long, smooth strokes; ensure full coverage without show-through.
3. Allow ±8 hours between coats; extend drying time in cold or wet conditions.
4. Overcoat within 18 hours to ensure optimal adhesion for the topcoat.
5. Follow with a premium decorative paint system suited to the project.

Cleanup

• When wet: Soap and water.
• When dry: Mineral turpentine.
• Dispose of contents responsibly; recycle empty containers.

A few scenarios where the product can be used

• New plastered interior walls in residential builds.
• Exterior concrete facades requiring stabilization before painting.
• Fibre-cement boards in commercial fit-outs.
• Brickwork in renovations where efflorescence control is essential.
• Gypsum plaster surfaces needing uniform topcoat performance.

Other products you might like for your painting system

Health and safety

Use in a well-ventilated area and avoid application when rain is expected. Because this product is flammable, keep away from sparks, heat, and open flames. Wear protective gloves and suitable clothing; if on skin, wash with soap and water. If swallowed, contact a doctor or poison centre immediately. In case of respiratory symptoms, move to fresh air and seek medical advice. Keep cool, protect from freezing, and store in a dry area below 25°C. Always follow best practices: prepare surfaces correctly, check batch numbers, and overcoat within the recommended window to ensure performance.

Want to know more about this product? Click here to view the DTS.

The post Duram Adhesion Plaster Primer | Solvent-Based, 20L first appeared on Habitat Potch.

Duram Adhesion Plaster Primer, Solvent‑Based, 5L, is a high‑performance primer formulated to penetrate and seal porous substrates. It tolerates high pH levels common in new cement, prevents efflorescence, and ensures optimum adhesion for subsequent coatings. Its solvent‑based formulation allows surfaces to breathe while promoting a uniform topcoat finish.

Duram Adhesion Plaster Primer Benefits and Features

• Excellent alkali resistance: Protects against paint degradation.
• Resists peeling and efflorescence: Ensures long‑lasting adhesion.
• Penetrating sealer: Stabilises powdery surfaces.
• Optimum adhesion: Compatible with oil‑ and water‑based topcoats.
• Good coverage and obliteration: Masks minor imperfections.
• Multi‑substrate use: Cement, fibre‑cement, concrete, brickwork, gypsum plaster, composite boards.
• Breathable finish: Allows moisture to escape.
• Quick drying: Faster turnaround for painting projects.

Steps to Follow for Applying the Duram Adhesion Plaster Primer

Preparation

1. Ensure surfaces are clean, dry, and free from dirt, grease, salt, algae, fungi, or loose paint.
2. For powdery or flaking surfaces, remove loose paint with a wire brush, sandpaper, or high‑pressure cleaner.
3. Allow surfaces to dry thoroughly before priming.

How to Apply the Duram Adhesion Plaster Primer

1. Stir thoroughly with a flat paddle for at least 5 minutes.
2. Apply evenly with a brush or roller using long, smooth strokes.
3. Ensure complete coverage; porous surfaces may require a second coat.
4. Allow 8 hours drying time between coats (longer in cold/wet conditions).
5. Overcoat within 18 hours with a premium Duram decorative paint.

Cleanup

• When wet: Soap and water.
• When dry: Mineral turpentine.

A Few Scenarios Where the Product Can Be Used

• New cement plaster walls
• Powdery gypsum plaster surfaces
• Concrete and fibre‑cement substrates
• Brickwork requiring efflorescence protection

Other Products You Might Like for Your Projects

Health and Safety

Duram Adhesion Plaster Primer is flammable. Keep away from sparks, heat, and flames. Use in a well‑ventilated area. Wear protective gloves and clothing. If swallowed, call a poison centre or doctor immediately. Avoid contact with skin and eyes. Dispose of contents responsibly—do not empty into drains or watercourses.

Want to know more about this product? Click here to view the DTS.

The post Duram Adhesion Plaster Primer | Solvent-Based, 5L first appeared on Habitat Potch.