Duram Adhesion Plaster Primer is a solvent-based plaster primer designed to penetrate porous masonry, resist alkali, and control efflorescence for a stable, long-lasting foundation. Because it bonds strongly to cement plaster, fibre-cement, concrete, brickwork, gypsum plaster, and composite boards, it enables reliable adhesion for both oil- and water-based topcoats. With quick drying and breathable sealing, projects progress smoothly while finishes remain uniform and durable.

Duram Adhesion Plaster Primer Benefits and Features

• Alkali resistance: Shields coatings on fresh cement and high-pH surfaces.
• Efflorescence control: Minimizes peeling caused by salt migration.
• Penetrating sealer: Stabilizes powdery, friable substrates for dependable adhesion.
• Multi-surface compatibility: Ideal for cement plaster, gypsum plaster, fibre-cement, concrete, brickwork, composite boards.
• Coverage efficiency: 6–8 m² per litre per coat; second coat for highly porous surfaces.
• Breathable seal: Allows moisture release while protecting the base.
• Surface masking: Promotes a uniform topcoat by hiding minor imperfections.
• Quick drying: Touch-dry ±2 hours; recoat ±8 hours for faster project turnaround.
• Topcoat versatility: Compatible with oil- and water-based decorative paints.
• Easy application: Brush or roller with smooth, even strokes.

Steps to follow for applying the Duram Adhesion Plaster Primer

Preparation

1. Clean the surface thoroughly—remove dust, dirt, grease, salts, algae, fungi, and loose or flaking paint.
2. For powdery or flaking areas, wire-brush, sand, or high-pressure clean; rinse and allow to dry.
3. Confirm moisture content is below 3% or ensure cement-based surfaces have cured for at least 28 days.
4. Check batch numbers on containers to maintain consistency across the project.
5. Mask adjacent areas and lay drop sheets to protect floors and fixtures.

How to apply the Duram Adhesion Plaster Primer

1. Stir thoroughly with a flat paddle; do not thin.
2. Apply evenly with a brush or roller using long, smooth strokes; ensure full coverage without show-through.
3. Allow ±8 hours between coats; extend drying time in cold or wet conditions.
4. Overcoat within 18 hours to ensure optimal adhesion for the topcoat.
5. Follow with a premium decorative paint system suited to the project.

Cleanup

• When wet: Soap and water.
• When dry: Mineral turpentine.
• Dispose of contents responsibly; recycle empty containers.

A few scenarios where the product can be used

• New plastered interior walls in residential builds.
• Exterior concrete facades requiring stabilization before painting.
• Fibre-cement boards in commercial fit-outs.
• Brickwork in renovations where efflorescence control is essential.
• Gypsum plaster surfaces needing uniform topcoat performance.

Other products you might like for your painting system

Health and safety

Use in a well-ventilated area and avoid application when rain is expected. Because this product is flammable, keep away from sparks, heat, and open flames. Wear protective gloves and suitable clothing; if on skin, wash with soap and water. If swallowed, contact a doctor or poison centre immediately. In case of respiratory symptoms, move to fresh air and seek medical advice. Keep cool, protect from freezing, and store in a dry area below 25°C. Always follow best practices: prepare surfaces correctly, check batch numbers, and overcoat within the recommended window to ensure performance.

Want to know more about this product? Click here to view the DTS.

The post Duram Adhesion Plaster Primer | Solvent-Based, 20L first appeared on Habitat Potch.

Duram Adhesion Plaster Primer, Solvent‑Based, 5L, is a high‑performance primer formulated to penetrate and seal porous substrates. It tolerates high pH levels common in new cement, prevents efflorescence, and ensures optimum adhesion for subsequent coatings. Its solvent‑based formulation allows surfaces to breathe while promoting a uniform topcoat finish.

Duram Adhesion Plaster Primer Benefits and Features

• Excellent alkali resistance: Protects against paint degradation.
• Resists peeling and efflorescence: Ensures long‑lasting adhesion.
• Penetrating sealer: Stabilises powdery surfaces.
• Optimum adhesion: Compatible with oil‑ and water‑based topcoats.
• Good coverage and obliteration: Masks minor imperfections.
• Multi‑substrate use: Cement, fibre‑cement, concrete, brickwork, gypsum plaster, composite boards.
• Breathable finish: Allows moisture to escape.
• Quick drying: Faster turnaround for painting projects.

Steps to Follow for Applying the Duram Adhesion Plaster Primer

Preparation

1. Ensure surfaces are clean, dry, and free from dirt, grease, salt, algae, fungi, or loose paint.
2. For powdery or flaking surfaces, remove loose paint with a wire brush, sandpaper, or high‑pressure cleaner.
3. Allow surfaces to dry thoroughly before priming.

How to Apply the Duram Adhesion Plaster Primer

1. Stir thoroughly with a flat paddle for at least 5 minutes.
2. Apply evenly with a brush or roller using long, smooth strokes.
3. Ensure complete coverage; porous surfaces may require a second coat.
4. Allow 8 hours drying time between coats (longer in cold/wet conditions).
5. Overcoat within 18 hours with a premium Duram decorative paint.

Cleanup

• When wet: Soap and water.
• When dry: Mineral turpentine.

A Few Scenarios Where the Product Can Be Used

• New cement plaster walls
• Powdery gypsum plaster surfaces
• Concrete and fibre‑cement substrates
• Brickwork requiring efflorescence protection

Other Products You Might Like for Your Projects

Health and Safety

Duram Adhesion Plaster Primer is flammable. Keep away from sparks, heat, and flames. Use in a well‑ventilated area. Wear protective gloves and clothing. If swallowed, call a poison centre or doctor immediately. Avoid contact with skin and eyes. Dispose of contents responsibly—do not empty into drains or watercourses.

Want to know more about this product? Click here to view the DTS.

The post Duram Adhesion Plaster Primer | Solvent-Based, 5L first appeared on Habitat Potch.

Woodoc Deck Penetrating Sealer in Deep Brown is a premium product designed to protect and beautify wooden decks and other exterior wooden surfaces. Its tinted formula provides a high film build and superior UV protection, ensuring your wood remains in top condition even under extreme weathering conditions.

Woodoc Deck Penetrating Sealer Benefits and Features

• UV Protection: Provides excellent UV protection to prevent wood from fading and deteriorating.
• Water Repellence: Offers superior water repellence to protect wood from moisture damage.
• High Film Build: Ensures a durable and long-lasting finish with proper application.
• Low-Gloss Finish: Enhances the natural beauty of the wood with a subtle gloss finish.

Steps to Prepare the Surface for Woodoc Deck Penetrating Sealer

1. General Preparation: Ensure the wood is clean, dry, and smooth. Do not wash or wipe wood with water before applying the product.
2. For New Wood: Sand until smooth, remove dust with a clean, dry cloth, and wipe with mineral turpentine.
3. For Previously Varnished Wood: Remove varnish by sanding or using a paint stripper, neutralize stripper, sand weathered wood, wash with Woodoc Wood Reviver if necessary, dry completely, sand until smooth, remove dust, and wipe with mineral turpentine.
4. For Oiled Wood: Sand until smooth, scrub with SteelWool and mineral turpentine, clean off the residue, and allow the surface to dry.
5. For Wood Previously Treated with Woodoc: Scrub with SteelWool and mineral turpentine, clean off the residue, and allow the surface to dry.

Steps to Follow For Applying Woodoc Deck Penetrating Sealer

1. Preparation: Stir the sealer very well before and during application to ensure colour consistency. Do not shake or dilute the product.
2. Application: Apply the sealer with a good-quality brush. Apply the first coat until the surface remains evenly glossy for at least 10 minutes. Apply more product to dull/dry areas. Allow the coat to dry completely.
3. Sanding: Sand lightly with SteelWool, remove dust with a clean, dry cloth, and wipe with mineral turpentine.
4. Coats: Apply two more coats in the same way. Do not sand after the third coat. Always apply a minimum of three coats for proper film build and durability.

A Few Scenarios Where The Product Can Be Used:

• Sealing and protecting wooden decks
• Treating exterior wooden furniture and structures
• Enhancing the appearance and durability of outdoor wooden surfaces

Other Products to Enhance Your Wood Care Project:

• Woodoc Antique Wax | 500ml, Clear

• Woodoc 50 Marine Exterior Sealer | 5L, Matt

• Hamilton’s Cleaning Rags 1kg

Health and Safety

When using Woodoc Deck Penetrating Sealer, follow the provided safety guidelines to prevent accidents. Always wear gloves and avoid warming the container over an exposed flame. Keep the product out of reach of children.

Want to know more about this product? Click on this link.

The post Woodoc Deck Penetrating Sealer | 5L, Deep Brown first appeared on Habitat Potch.