Duram Urethane Wood Varnish Overview

Duram’s oil-based urethane varnish in Teak is engineered for high-performance wood protection. Designed for both interior and exterior use, it offers a durable finish that highlights wood grain while defending against environmental stressors.

Duram Urethane Wood Varnish Benefits and Features

• Scratch-Resistant Coating: Maintains surface integrity under daily use
• UV Shielding: Reduces sun damage and fading
• Weather Durability: Withstands moisture and outdoor exposure
• Grain Enhancement: Transparent finish reveals wood’s natural texture
• Flexible Protection: Adapts to wood movement without cracking
• Decay Prevention: Blocks rot and insect intrusion
• Water Sealing: Prevents swelling and warping
• Strong Bonding: Adheres securely to prepared surfaces
• Easy Maintenance: Fully washable for long-term upkeep
• Simple Application: Compatible with multiple tools and techniques

Steps to Follow for Applying the Duram Urethane Wood Varnish

Preparation:

1. Clean the surface thoroughly—remove dirt, grease, algae, and other contaminants.
2. Ensure wood moisture content is below 14%.
3. Repair any imperfections using appropriate filler or knotting sealer.
4. For bare wood: Sand with 80 or 100-grit paper, wipe with a damp cloth, and allow to dry.
5. For previously varnished wood: Sand to a matte finish, remove dust, and test compatibility.
6. With flaking surfaces: Strip old varnish using Duram EcoStripp or DuraStripp, then sand evenly.

How to Apply the Duram Urethane Wood Varnish:

1. Stir thoroughly for 5 minutes using a flat paddle.
2. Apply in a clean, dust-free environment between 5°C and 35°C.
3. Use a natural bristle brush, foam roller, or air-assisted spray.
4. Apply 2 or more coats in the direction of the wood grain.
5. Use long, smooth strokes; sand lightly between coats if fibres appear.
6. Ensure all exposed areas, joints, and end grains are coated.

Cleanup:

• Wipe tools with Mineral Turpentine
• Dispose of waste according to local regulations
• Store remaining varnish in a sealed container
• Clean hands and skin with soap and water

A Few Scenarios Where the Product Can Be Used:

• Refinishing wooden window frames
• Protecting outdoor furniture from weather
• Sealing decorative trims and mouldings
• Enhancing the grain of wooden doors
• Preserving wooden fences in coastal areas

Other Products You May Need for Your Wood Finishing Project:

• Duram
• Plascon
• Dulux

Health and Safety

Always work in a well-ventilated area and wear protective gloves and eyewear during application. Avoid contact with skin and eyes, and keep out of reach of children. Do not apply near open flames or heat sources. Ensure surfaces are dry and clean to prevent reactions. In case of accidental ingestion or prolonged exposure, seek medical advice immediately. Follow all safety instructions on the packaging for optimal use.

Want to know more about this product? Click here to learm more.