Flash Harry Liquid Plastic Overview
Flash Harry Liquid Plastic is a high-performance waterproofing and coating solution formulated for roofs and exterior surfaces. Its latex-enhanced acrylic base provides exceptional stretch, adhesion, and UV resistance, making it a trusted choice for both residential and commercial applications.
Flash Harry Liquid Plastic Benefits and Features
- Latex Flexibility: Allows up to 350% stretch for dynamic surfaces
- UV Stability: Resists degradation from sun exposure
- Superior Adhesion: Bonds effectively to multiple roof types
- Non-Flammable: Safe for use in residential environments
- Quick Drying: Rain-resistant within hours
- Multi-Surface Use: Compatible with tiled, slate, iron, and timber roofs
- DIY Friendly: Easy to apply with brush, roller, or spray
- Protective Finish: Seals joints, ridges, and parapet walls
- Versatile Coverage: Suitable for both waterproofing and coating applications
Steps to Follow for Applying Flash Harry Liquid Plastic
Preparation:
- Clean all surfaces thoroughly—remove dirt, grease, algae, and contaminants.
- For galvanized iron: Treat with acid degreasing primer or Frogskin Galvanised Iron Cleaner.
- For rusted surfaces: Brush down and apply rust converter.
- For porous surfaces: Prime with Plaster Pal bonding liquid or a 50% diluted coat of Liquid Plastic.
How to Apply Flash Harry Liquid Plastic:
- For waterproofing: Saturate membrane with compound before application.
- For coating: Apply a minimum of two coats with brush, roller, or spray.
- Alternate coats at right angles for optimal coverage.
- Maintain ambient temperature between 5°C and 35°C during application.
- Allow 30 minutes drying time between coats; final coat cures in 24–48 hours.
Cleanup:
- Clean tools with water before the product dries
- Dispose of waste according to local regulations
- Seal unused product in original container
- Wash hands and skin with soap and water
A Few Scenarios Where the Product Can Be Used:
- Waterproofing small flat roofs under 20m²
- Sealing around skylights and chimneys
- Coating parapet walls and flashings
- Protecting lap joints and roof screws
- Reinforcing ridges and valleys on pitched roofs
Other Products You May Need for Your Roof Protection Project:
Health and Safety
Use in a well-ventilated area and wear protective gloves and eyewear during application. Avoid contact with skin and eyes. Do not apply near open flames or heat sources. Ensure surfaces are dry and clean before use. Not suitable for submerged areas or large gaps exceeding 5mm. Follow all safety instructions on the packaging for optimal results.
Want to know more about this product? Click here to learn more.
Reviews
There are no reviews yet.