Plascon Tradepro Bright Matt PVA Overview

Plascon Tradepro Bright Matt PVA is a high-quality, water-based paint designed for both interior and exterior use. Its high hiding power ensures excellent coverage, while the smooth, bright white matte finish adds a clean, professional look to any surface. Easy to apply with a brush, roller, or airless spray, it’s perfect for new construction projects or refreshing previously painted areas.

Plascon Tradepro Bright Matt PVA Benefits and Features

• High Hiding Power: Offers excellent coverage, reducing the number of coats required.
• Smooth White Finish: Provides a bright, uniform matte appearance for walls and ceilings.
• Versatile Application: Suitable for both interior and exterior surfaces, including plaster, concrete, and brickwork.
• Easy to Apply: Can be applied with a brush, roller, or airless spray for consistent results.
• Quick Drying Time: Touch dry in 30 minutes, allowing for faster project completion.
• Durable and Long-Lasting: Designed to withstand various environmental conditions when used on properly prepared surfaces.

Steps to Follow For Using The Plascon Tradepro Bright Matt PVA

Preparation

1. Ensure surfaces are dry, sound, and free from dust, dirt, grease, and oil.
2. Remove loose particles, flaking paint, and contaminants using appropriate cleaning methods.
3. For new plaster, concrete, or porous surfaces, prime with PLASCON BONDING LIQUID.
4. Apply TRADEPRO SOLVENT BASED PLASTER PRIMER on gypsum plaster or board.
5. Sand glossy surfaces to a matte finish and apply TRADEPRO UNDERCOAT where needed.
6. Fill defects with POLYCELL POLYFILLA and spot prime-filled areas.

How To Apply Tradepro Bright Matt PVA

1. Stir thoroughly with a flat paddle until the paint is homogeneous.
2. Apply two or more coats to achieve complete obliteration, maintaining a wet edge to avoid lap marks.
3. Work from corner to corner or from natural cut-off points to ensure even coverage.
4. Avoid touching up; instead, repaint full panels for uniformity.

Usage Tips

1. Do not thin the paint unless specified for specific application methods.
2. Clean tools immediately after use with water.
3. Allow at least 1 hour between coats at 23°C for optimal results.
4. Avoid downing tools during application to maintain consistency in texture and colour.

A Few Scenarios Where the Product Can Be Used:

• New Plaster Walls: Achieve a clean, uniform finish on freshly plastered surfaces.
• Exterior Facades: Durable for outdoor use on concrete and brickwork.
• Interior Ceilings and Walls: Ideal for creating a smooth, matte finish in living spaces.
• Building Boards: Suitable for various types of primed building boards in both residential and commercial settings.
• Renovation Projects: Refresh previously painted surfaces with a high-hiding, bright white coat.

Other Products You May Need for Your Painting Project:

• Plascon Wall And All Tray Set | Long-Twisted Pile, 255mm

• Hamilton’s DIY Value Paint Tray Set

• Plascon Polvin Tray Set | Medium Pile Roller, 255mm

Health and Safety

Ensure adequate ventilation during application and drying. Avoid inhaling fumes or prolonged skin contact. Wear protective gear, such as gloves and a mask, especially when sanding or preparing surfaces. Clean spills immediately with water and store unused paint in a cool, dry place, tightly sealed. Keep out of reach of children and pets. Dispose of empty containers and unused paint in accordance with local regulations.

Want to view the technical data sheet of the product? Click on this link.