Duram Urethane Wood Varnish Overview

Formulated for long-term wood protection, this varnish combines aesthetic enhancement with robust performance. Its oil-based urethane formula penetrates deeply, sealing wood against moisture and environmental damage while preserving its natural beauty and rich Imbuia tone.

Duram Urethane Wood Varnish Benefits and Features

• Gloss or Suede Finish: Choose your preferred sheen
• UV Protection: Shields wood from sun damage
• Weather Resistance: Withstands outdoor conditions
• Scratch-Resistant Surface: Ideal for high-contact areas
• Rot and Insect Defense: Prevents biological degradation
• Moisture Barrier: Seals against water penetration
• Flexible Coating: Prevents cracking and peeling
• High Transparency: Enhances wood grain and colour depth
• Excellent Adhesion: Bonds to bare and treated wood
• Easy Application: Brush, roller, or spray compatible
• Maintenance Friendly: Recoat every few years for lasting protection

Steps to Follow for Using Duram Urethane Wood Varnish

1. Stir varnish thoroughly with flat paddle for 5 minutes
2. Ensure surface is clean, dry, and free of contaminants
3. Sand wood with 80–100 grit paper; wipe off dust with damp cloth
4. Apply in dust-free area between 5°C and 35°C
5. Use natural bristle brush, foam roller, or air-assisted spray
6. Apply 2–3 coats in direction of wood grain
7. Allow 8 hours drying time between coats (6 extra hours in cold/wet weather)
8. Final coat requires 12 hours before closing doors/windows
9. Sand lightly between coats if fibres are raised
10. Coat end grain, joints, and exposed backs thoroughly

Preparation

• Bare Wood: Sand, fill grain if needed, wipe clean
• Previously Varnished Wood: Sand to matte finish, test patch recommended
• Flaking Surfaces: Remove loose paint/varnish, use Duram EcoStripp or DuraStripp if needed
• Moisture Content: Ensure wood is below 14% moisture

How to Use the Duram Urethane Wood Varnish

1. Stir well before use
2. Apply evenly with long, smooth strokes
3. Dilute with 5–10% Mineral Turpentine if required
4. Avoid applying in rainy or humid conditions
5. Recoat every 2–3 years for optimal protection

Cleanup

• Clean brushes and tools with Mineral Turpentine
• Wipe spills immediately
• Store container in cool, dry place
• Seal tightly when not in use
• Dispose of waste responsibly

A Few Scenarios Where the Product Can Be Used

• Varnishing wooden doors and window frames
• Protecting outdoor furniture and fences
• Sealing trims and decorative woodwork
• Enhancing indoor cabinetry and shelving
• Preserving wood in coastal or industrial environments

Accessories to Pair With Your Varnish

• Duram
• Plascon
• Dulux

Health and Safety

Use in well-ventilated areas. Avoid contact with skin and eyes. Wear gloves and protective eyewear. Keep away from heat, flames, and direct sunlight. Store below 35°C. Keep out of reach of children.

Want to know more about this product? Click here to learm more.